Atomstack M100 Fits The Following Models:
A5 20W, A5 30W, A5 M30, A5 Pro, A5 Pro+, A5 M40, A5 M50, A5 M50 Pro, A10 Pro, S10 Pro, X7 Pro.
If your laser engraving machine is the above model, upgrade it with the most powerful 20W diode laser module!
Features:
- The M100 laser module can be installed on any engraving machine model of Atomstack 10W series (A10 Pro/S10 Pro/X7 Pro), just use the corresponding adapter board, and it can be used without any additional settings.
- Comes with a set of Atomstack air assist kits, which can greatly optimize your artistic creation and work. It can not only improve work efficiency, but also achieve flawless cutting. It is the best partner of your laser.
- If you own other brands of engravers, such as Ortur, NEJE, Two-Trees, etc., you can also install our Atomstack M100 laser module, which comes with a free adapter in the box.
- Higher laser power, faster engraving speed! NEW ATOMSTACK M100 20W four Ultrafine Compression Spot Laser Module: Can be used for laser cutting machine, laser engraving machine, CNC, DIY laser. Upgrade high quality fixed focus laser, no need to focus. The engraving speed is 200% higher than other 10W lasers.
Atomstack M100 Laser Module Features:
- It can be used for laser cutting machine, laser engraver, CNC, DIY laser.
- Laser protective cover: The laser is equipped with a protective cover to protect the eyes of the user without the need to wear additional protective glasses. At the same time prevent pets from grabbing the laser spot.
- Made of aluminum, strong and durable.
- Upgraded high quality fixed-focus laser, no need to focus.
- Aviation aluminum TTL driver board with cooling fan can ensure continuous long time work.
- Engravable materials: wood, bamboo, cardboard, plastic, leather, PCB board, aluminum oxide, non-reflective electroplating layer and lacquered metal, after blackening Utility knife.
- Cutable material: cardboard, non-woven fabric, veneer, acrylic, some thin plastic board.
- 0.08*0.1mm Four compression spot light coupling technology makes engraving more powerful
- and precise .
- Engraving speed is 200% higher than other 10W lasers.
- High energy can cut 8.5mm thickness plates at one time.
- The laser sintering temperature is 2400 degrees, the effect of engraving metal is better.
- The laser has a built-in horizontal gyroscope anti-tip protection device, and it stops working when the tilt angle is 20°.
- The wind-collecting hood can clean the smoke and dust to protect the lens to avoid laser energy attenuation.
- The transfer circuit board is compatible with 95% of laser engraving machines on the market，Including Atomstack, ortur, Neje, twotree, etc.
Laser module Specification:
|
Brand |
|
|
Model |
M100 |
|
Optical Output Power |
20-21W |
|
Product Material |
Aluminum 6061 Anode |
|
Housing Size |
140*65*60mm |
|
Circuit Board Size |
44*52mm |
|
Circuit Board |
V/PWM Modulation Board |
|
Wire Rod |
22# 2P2.54 Terminal Reverse Wire 80mm |
|
Optical Lens |
φ6/glass |
|
Fan |
24V |
|
Laser Beam Mode |
Spot |
|
Working Mode |
Pulse Work |
|
Lightspot Size |
0.08*0.1mm |
|
Working Time |
10000H |
|
Working Temperature |
0℃~70℃ |
|
Storage Temperature |
一40℃~85℃ |
|
Sintering Temperature |
2000~2400℃ |
|
Product Net Weight |
1715g |
|
Items |
Symbol |
Min |
Typ |
Max |
Unit |
Condition |
|
Optical Output Power |
Po |
|
9.5 |
10 |
W |
24V Power |
|
Working Current |
Iop |
/ |
2.9 |
3.2 |
A |
|
|
Operating Voltage |
Vop |
/ |
24 |
/ |
V |
|
|
Laser Wavelength |
λp |
|
455 |
460 |
nm |
|
|
Electric Power |
Wl |
/ |
69.6 |
76.8 |
W |
|
Air assist kits Specification:
|
Brand |
Atomstack |
|
Model |
F30 |
|
Parameter |
10-30L/Min (Adjustable airflow speed) |
|
Noise Decibel |
60dB |
|
Package Weight |
1KG |
Package Included:
| 1* M100 Laser Module | 1* PCB Circuit Board | 1* Fixed Focus Plate |
| 1* Connection Line | 1* Wrench | 6* Screws |
| 1* Power Supply | 1* F30 Air Assist Kit | |
| 1* Compatible Plate（5W Series And 10W Series Use Different Adapter Boards, Please Pay Attention To The Distinction） |
