Atomstack S40 Pro A40 Pro X40 Pro Feature:
- High power: ATOMSTACK S40 Pro, as the most cutting-edge laser engraving machine, has the highest 48W optical power in the industry, which is suitable for professional work and greatly improves work efficiency. It can cut through 18mm basswood, pine and paulownia at one time, and 9mm The mdf density board can cut through 0.1mm stainless steel sheet at one time.
- Switch the engraving/cutting mode with one key: ATOMSTACK S40 Pro adopts a brand-new laser design, which can switch between 20W and 40W output power with one key through the physical button, and open different modes for different tasks of engraving and cutting. Strong output.
- New motion structure: Different from Atomstack's previous laser engravers, Atomstack S40 Pro adopts a more stable linear guide X-axis, which makes S40 Pro work stably at a high speed of 600mm/s, and the engraving and cutting lines are smooth without shaking.
- Tank chain harness: In order to make the machine more beautiful and the structure more stable, Atomstack S40 Pro adopts a tank chain wire harness solution that is not available in other models. The wire harness runs smoothly without entanglement and improves the life of the wire.
- Professional cutting machine: adopt the most stable 48W high optical power laser module at present. The latest 8 6W laser coupling technology, the peak power can be as high as 48W, can cut 20mm basswood, 25mm pine and paulownia, 12mm mdf density board.
- Standard automatic switch air assist kit: standard F30 Pro high-flow air assist, you can turn on the lightburn M7 mode to realize automatic switch air assist in different modes of Laser cutting/engraving. While the cutting ability has been greatly improved, the cutting accuracy and cutting quality can also be greatly optimized, making Atomstack S40 Pro a real professional laser cutting machine.
- Upgrade Atomstack's self-developed 32-bit motherboard: built-in 256-bit color scale map, which makes the engraving work more delicate and has higher contrast, so that your engraving is not only black.
- New non-blocking laser: The new S40 laser has a built-in tool-free focusing module, and a built-in air assist system, without the interference of wires, simple and beautiful. The patented double-layer wind gathering cover design can ensure that the laser will not be blocked and the lens will not be polluted for a long time, which greatly improves the life of the laser.
- Atomstack's self-developed mobile phone APP: Atomstack's self-developed mobile phone APP is now available in major Android application markets and Apple APPstore (you can also scan the QR code of the manual to download). It is small in size and multi-functional, bringing a new control experience. Come on give it a try.
- Brand-new filter panoramic glass eye protection design: the panoramic filter glass protective cover can protect your eyes very well, filtering 97% of ultraviolet light, you and the people around you can watch without wearing goggles Laser engraving. Reduce your goggle expense and inconvenience of wearing goggles.
- Sturdy and easy-to-install structural design: The all-aluminum anodized structural design makes the laser engraver more durable and improves the engraving accuracy. The whole structure has been designed for quick installation, and the installation can be completed in generally 20-30 minutes.
- Wide compatibility: the machine can be compatible with various mature laser engraving software, such as LaserGRBL, LightBurn, supports Win XP / Win 7 / Win 8 / XP / Win 10, also supports MAc system (LightBurn), engraving file format Support NC, BMP, JPG, PNG, DXF, etc.
- Upgraded compressed spot coupling technology: ultra-fine laser focus area reduced to 0.1*0.1mm, high-density laser can easily cut thick wood, black acrylic; can directly engrave mirror stainless steel metal, ceramics, glass, engraving & cutting speed is higher than 30W 40%, comparable to the cutting effect of 80W CO₂ laser engraving machine.
- Integral screw: The laser engraver machine uses an integral screw instead of a combined shaft coupling. The stepping motor and the screw are integral, which makes the movement of the laser more precise and the coupling more durable.
- Laser sintering temperature up to 3000℃
- Safety protection: Equipped with an emergency stop button, if there is an unexpected situation, the machine can be stopped at any time, and it is equipped with a reset switch and a limit switch to engrave more safely
- Expandable engraving size: Modular design of the fuselage mechanism, only need to replace the Y-axis frame components, you can get 850*400mm super large engraving size.
Atomstack S40 Pro and A40 Pro are the same as the X40 Pro, all three of them are equipped with the 48W laser, and only the frame color is different.
ATOMSTACK S40 Pro Laser Engraver Specification:
- Product model: ATOMSTACK S40 Pro
- Engraving size: 400*400mm
- Engravable/cuttable material
- Carving material: wood, bamboo, cardboard, plastic, leather, PCB board, aluminum oxide, non-reflective
- Electroplated and painted metal, 304 mirror stainless steel, glass, ceramics, cotton cloth, slate;
- Cutting materials: cardboard, non-woven fabrics, wood, plywood, acrylic (transparency needs to be painted black), some thin plastic plates, sponge, metal sheets such as aluminum and stainless steel;
- Machine power: 210W
- Laser power: 180W (in cutting mode)
- Laser output optical power: 40-48W
- Laser wavelength: 455±5nm
- Engraving precision: 0.01mm
- Focusing method: fixed focus laser, no focusing
- Laser protective cover: there is a protective cover on the laser to protect the user's eyes, no need to wear additional protective glasses. At the same time prevent pets from grabbing the laser point
- Operating software: LaserGRBL, LightBurn, support Win XP / Win 7 / Win 8 / XP / Win 10 system
- Supported file formats NC, BMP, JPG, PNG, DXF,
- Data transmission method: USB connection
- Power supply: international common standard power input: 100-240V AC, 50/60HZ output: 12V 8.5A
- Certification: CE FCC RoHS FDA PSE
S40 Pro Engraving Machine Packing List:
| 1 x linear guide X-axis assembly | 1 x profile on the base | 1× Base lower profile | 1×laser module | 2 x tank chain |
| 1 x F30Pro dual pump air assist | 1×Mounting screw | 1×tool bag | 4×foot pad foam | 1× fixed focus film |
| 3 x acrylic sheet | 3 x wood chips | 10×wire tie | 1 x desiccant | 1×hair brush |
|
1×clean cloth |
1×card reader | 1 x TF card | 1 x power adapter | 1 x manual |
| 1×data cable | 1 x Y axis left profile | 1 x Y axis right profile | 3×foot bracket | 1 x goggles |
Precautions:
●When operating the laser engraving machine, please install the laser protective cover; if it is not installed, you need to wear goggles.
●Do not touch the laser with your hands, or you may burn your hands.
●Please avoid strong impact on the machine.
●Children under the age of 14 are prohibited from using this product, and children over the age of 14 need adult supervision.
●Do not apply the laser directly to any specular reflective object, which may cause injury to the operator or burn the laser.
